I have an SX-200 LW 19 Q46.0.1 and several phones are going to lockout and then coming back into service. The phones are all on different cards and they are in different bays. The logs show "excessive messaging. remove from service. Any ideas? I have replaced BCC card and MCCIIIE.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Excessive messaging on SX200 dnic sets
- Thread starter aholbert
- Start date
Telecomp9434
Vendor
Unfortunatley you might have a problem with the DNIC cards. If you do not have these revisions, then it is possible your DNIC cards are missing a fuse which make them overheat, in turn causes the system to reset ( usuaully off hours). But the logs will indicate excessive messaging.
REV: white dnic should be at 4.6 and blue should be 2.5
REV: white dnic should be at 4.6 and blue should be 2.5
- Status
Similar threads
- Locked
- Question