Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Event ID 1070 on SCSI physical drive status change

Status
Not open for further replies.

zaccaz

MIS
Aug 10, 2005
270
HK
Hi there, after a planned reboot on hp proliant dl380g3 server, found in event log as below:

Type: Error
Event Source: Storage Agents
Event Category: Events
Event ID: 1070
Date: 02/02/2010
Time: 20:57:49
User: N/A
Computer: XXXXXXXXX
Description:
SCSI Physical Drive Status Change.
The SCSI physical drive with SCSI target 7 connected to SCSI bus 1 of the controller in slot 3 has a new status of 10.
(Drive status values: 1=other, 2=ok, 3=failed, 4=notConfigured, 5=badCable, 6=missingWasOk, 7=missingWasFailed, 8=predictiveFailure, 9=missingWasPredictiveFailure, 10=offline, 11=missingWasOffline)
[SNMP TRAP: 5020 in CPQSCSI.MIB]

during the reboot, from the POST screen message, from the scsi disk led signals, there should be no problem

after further checking event log, found that whenever server rebooted, one event id 1070 was recorded

any idea what's wrong or i could ignore this? many thx!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top