ETR PORTS TO T/R 1

[ritelcarlos]

Hello im still trying to program one of my last 4 ports to be a t/r port on my ETR card

my question is is there any programing that is different on a magix 1.1 than a magix 2.2

what i did was program my t/r ports on a magix 1.1 and everything works fine but when i program the same thing on a magix 2.2 it does not work correctly i don't hear any tone
i know this is kind of confusing but i don't know how to explain it any better

 

[Westi]

I just had a look into the R2.2 manual and it says that the first 10 ports are ETR only and the last 6 can be ETR or T/R so if you have the port 1-10 then it will only be ETR capable I read the same thing in the R3.0 manual


Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it

 

[Westi]

sorry I hit the send to fast
so you should be good with the last 4 ports for T/R and nothing should be required over and above that to make it work

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it