Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ETR-18/18D Telephone (Key Mode)?

Status
Not open for further replies.

TheDoz

Vendor
Jul 15, 2005
595
US
How many lines can I assign to an 18 button Partner phone on Magix ETR Port? Has seven existing c.o. lines (801-807) and a loud speaker page(812). Tried assigning line 808 to ETR phone but line did not show up on phones. Assigned line 808 on ETR 34 Button O.K. Can I put more than 8 lines on ETR 18 Button phone or is 8 lines the limit without changing it out with 34 button phone?
Thanks in Advanced.

"The lack of understanding is the root of all problems
 
Those sets map their buttons in a strange manner.

You may need to "Fill in" some buttons to get the lines where you want them.

the layout is like this:



5 10 14 18

4 9 13 17

3 8 12 16

2 7 11 15

1 6

 
Thanks for your reply. Out of all the phones I programmed, I happened to check the one I missed. I thought it was a system wide problem. It was time for me to leave the site so I did not checked the other 18 button sets. So I posted this. When I went back today, I checked the others and they worked so you can add more than just 8 lines on an ETR 18 button set.
Thanks again.

"The lack of understanding is the root of all problems
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top