Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ethernet Drops when model dials

Status
Not open for further replies.

tjcooper72

Technical User
Jan 15, 2008
20
0
0
US
I have a couple URS modems dialing remote locations to pull down data. Everytime they dial I get an Error. 29 in the syslog (cant connect to time server).

It appears as if the OS doesnt allow two networks to be connected at the same time. It could also be something in the modem driver.

any ideas?
 
well my first thought is possible irq conflicts, what is the operating system ? I would check in device manager and see what the i/o, & IRQ are set to,
 
Your heading says Ethernet Drops.... What is the Ethernet cable connected to? Router? Switch?

A similar problem with some equipment here turned out to be the PSU going bad. I was initially alerted to this because the PSU created undue electrical interference in a radio close by...

ROGER - G0AOZ.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top