Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ethernet card options
- Thread starter KevR
- Start date
It depends if the driver is a module or built in.
If it is a module, then edit the /etc/modules.conf
add
make sure you have
alias eth0 e1000
or
alias eth0 eepro100
(was unsure of which card you were refering to)
then add
options eepro100 or e1000 Speed=X, Duplex=X
(either eepro100 or e1000)
If it is a module, then edit the /etc/modules.conf
add
make sure you have
alias eth0 e1000
or
alias eth0 eepro100
(was unsure of which card you were refering to)
then add
options eepro100 or e1000 Speed=X, Duplex=X
(either eepro100 or e1000)
- Status
Similar threads
- Locked
- Question
- Locked
- Question