ETH Alarm

[config5623]

Hi all,

Does this look like a Network or cabling problem?

Thanks

Port Mtce Name Alt. Name Test No. Result Error Code
01B13 VAL-BD 52 PASS
01B13 VAL-BD 598 PASS
01B13 VAL-BD 600 PASS
01B13 VAL-BD 601 PASS
01B13 VAL-BD 1680 ABORT 0
01B1333 ETH-PT IPv4 1281 ABORT 1125
01B1333 ETH-PT IPv4 1286 PASS
01B1333 ETH-PT IPv4 1282 FAIL
01B1333 ETH-PT IPv4 1511 ABORT 1115

 

[phoneguy55]

Link Integrity Inquiry Test (#1282)
Link integrity lost due to problem with attachment of Ethernet cable to the
port.
1. Repeat the test.
2. If the test fails, verify that the cable properly is secured to the
Ethernet port and to the bus.
3. Verify the C-LAN circuit pack’s link integrity LED is lit.
4. Retry the test.
5. If problem persists,

TCP/IP Ping Test (#1281)
1125 ABORT PPP/Ethernet link not in service.
1. Verify whether the PPP/Ethernet link is in service with
status port location or status link n.
2. If the link is not in service, release the link with
release link n or release port location.
3. Repeat the test.

Verify NIC Options Test (#1511)
1115 ABORT Unable to allocate system resources to run this test.
1. Retry the test at one minute intervals up to a maximum of 3 times