Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Essentials Sync from ANI

Status
Not open for further replies.
wonkmike

wonkmike

MIS
Mar 29, 2004
2
CA
When setting up Device Syncronization, I need to enter the essentials server port to use. I tried 1741 and 1751 but always get "Check Essentials Server Information" when I press Apply. I suspect the port because the other settings are hard to get wrong. RME and Campus are on the same server.

Has anyone out there successfully done this?

thx
 
Status
Not open for further replies.

Similar threads

nisheeth68
  • Locked
  • Question
Need to connect VLAN turnk from Port 05 and 06 to Cisco Cat65XX switch
Replies
0
Views
158
nisheeth68
nisheeth68
ghostbuster80
  • Locked
  • Question
ani server is not running
Replies
0
Views
73
ghostbuster80
ghostbuster80
trubbleshute
  • Locked
  • Question
Backup running config from CW to computer
Replies
1
Views
104
nbowden
nbowden
Owhe
  • Locked
  • Question
ANI Server 4.0 Problems
Replies
0
Views
70
Owhe
Owhe
boodox
  • Locked
  • Question
ANI Server not working....
Replies
2
Views
91
gallop
gallop

Part and Inventory Search

Sponsor

Back
Top