Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ESS Server not saving translations

Status
Not open for further replies.

bengon1

Vendor
Jul 29, 2010
18
US
I have one for ya...

I have an ESS Server that is not saving translations...

The following has been verified.

CM/ESS Software versions match
Save Trans All
Save Trans ESS
reset system 4
list trace ras ip-address (IP) send/rcv success
ESS Registration (y)
MTU Settings (1500) same as other successful LSP/ESS server backups.
100MB Full Duplex on Main/ESS/Switchport/auto-neg off
stop -caf start -ca
Time of ESS/Main CM are within 1min
CLAN and Primary IP controllers correct
No denial events on Main or ESS
Status ess cluster= Versions correct/all active and standby mode
ipsi-port networks active


Sniffer traces show some possible conflicts but nothing that should stop saving translations.
Last translations saved was 3 weeks ago and the ESS Server will not save translations.

Avaya is unable to figure this one out and the Network administrator has even checked.

Lets hear it...




 
An ESS server does not save translations.
ESS servers get translations and file sync from the main active server.

For Main and ESS:
Hardware platforms? CM software versions?
active Service Packs? (Post swversion from each)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
ESS Details:

CM Reports as: R015x.02.1.016.4
CM Release String: S8800-015-02.1.016.4

02.1.016.4-18576 activated cold patch 18576 for 02.1.016.4

KERNEL-2.6.18-128.AV7d activated cold patch 2.6.18-128.AV7d for 0


CM Translation Saved: 2011-03-30 23:06:51

CM License Installed: 2010-09-24 14:04:09

CM Memory Config: Standard


Main:

CM Reports as: R015x.02.1.016.4
CM Release String: S8720-015-02.1.016.4

UPDATES:
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.1.016.4-18239 unpacked cold combo of 18111 (5.2.1sp02.0
02.1.016.4-18475 unpacked cold patch 18475 for 02.1.016.4
02.1.016.4-18576 activated cold patch 18576 for 02.1.016.4

KERNEL-2.6.18-128.AV7c unpacked cold patch 2.6.18-128.AV7c for 0
KERNEL-2.6.18-128.AV7d activated cold patch 2.6.18-128.AV7d for 0
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top