CyberJMC66
Technical User
I have the following configuration (and have posted this question before);
Cisco 3620 running IOS 12.2(13) with IPSEC/FW
Two ethernet interfaces -
One to public Internet address (NAT outside)
*** Have four contiguous IP addresses on outside
One to internal RFC1918 address (NAT inside, 10.x.x.x)
I would like to be able to get my Nortel VPN client to passthru firewall properly. I can do a static IP nat statement to get one IP address to work (ie.
ip nat source static esp ....
Question: How do I setup ESP nat to allow any (or up to 4) hosts on inside to make VPN connections through firewall?
Cisco 3620 running IOS 12.2(13) with IPSEC/FW
Two ethernet interfaces -
One to public Internet address (NAT outside)
*** Have four contiguous IP addresses on outside
One to internal RFC1918 address (NAT inside, 10.x.x.x)
I would like to be able to get my Nortel VPN client to passthru firewall properly. I can do a static IP nat statement to get one IP address to work (ie.
ip nat source static esp ....
Question: How do I setup ESP nat to allow any (or up to 4) hosts on inside to make VPN connections through firewall?