ESN310

[fouesnant]

Hello all

We have configured an ESN310 for IPhone.
The ESN 310 is connected to an ADSL modem that has a 10 Mbits Half duplex interface.
Everything works perfectly.
Yesterday, there has been a power down in the building.
But the ESN 310 does not recover the saved configuration.
More difficult, it was not possible to modify agin the configuration.
We have been obliged to activate the default factory configuration to have it back working and do the same modifications.
But we are afraid that the next time the power will go down, the same problem appear.
What should we do ?
[tt]
Username: admin

Password:



ESN310 Ethernet Switch with PoE

Copyright (C) Ericsson AB - 2003, All Right Reserved

Console#

Console#show interfaces status ethernet 1/25

Information of Eth 1/25

Basic information:

Port type: 1000T

Mac address: 00-01-EC-CF-C4-FA

Configuration:

Name:

Port admin: Up

Speed-duplex: Auto

Capabilities: 10half, 10full, 100half, 100full, 1000full,

Broadcast storm: Enabled

Broadcast storm limit: 500 packets/second

Flow control: Disabled

Lacp: Disabled

Port security: Disabled

Max MAC count: 0

Port security action: None

Current status:

Link status: Up

Port operation status: Up

Operation speed-duplex: 10half

Flow control type: None

Console#show power inline status

Interface Admin Oper Power(mWatt) Power(used) Priority

---------- ------- ---- ------------ ------------ --------

Eth 1/ 1 enable off 23100 0 low

Eth 1/ 2 enable on 23100 2470 low

Eth 1/ 3 enable off 23100 0 low

Eth 1/ 4 enable on 23100 2470 low

Eth 1/ 5 enable off 23100 0 low

Eth 1/ 6 enable on 23100 2470 low

Eth 1/ 7 enable off 23100 0 low

Eth 1/ 8 enable on 23100 2470 low

Eth 1/ 9 enable off 23100 0 low

Eth 1/10 enable on 23100 3040 low

Eth 1/11 enable off 23100 0 low

Eth 1/12 enable on 23100 2470 low

Eth 1/13 enable off 23100 0 low

Eth 1/14 enable on 23100 2755 low

Eth 1/15 enable on 23100 2755 low

Eth 1/16 enable on 23100 2470 low

Eth 1/17 enable off 23100 0 low

Eth 1/18 enable off 23100 0 low

Eth 1/19 enable on 23100 2470 low

Eth 1/20 enable on 23100 2755 low

Eth 1/21 enable off 23100 0 low

Eth 1/22 enable off 23100 0 low

Eth 1/23 enable off 23100 0 low

Eth 1/24 enable off 23100 0 low

Console#

Console#dir

file name file type startup size (byte)

-------------------------------- -------------- ------- -----------

Unit1:

PoE_Diag_V2.0.0.1.bix Boot-Rom image Y 403828

CXC_132_6712_V2.0.1.2.bix Operation Code Y 1580272

Factory_Default_Config.cfg Config File Y 3851

-------------------------------------------------------------------

Total free space: 5111808

Console#configure

Console(config)#interface ethernet 1/25

Console(config-if)#speed-duplex 10half

Console(config-if)#no negotiation

Console(config-if)#end

Console#configure

Console(config)#no spanning-tree

Console(config)#end

Console#dir

file name file type startup size (byte)

-------------------------------- -------------- ------- -----------

Unit1:

PoE_Diag_V2.0.0.1.bix Boot-Rom image Y 403828

CXC_132_6712_V2.0.1.2.bix Operation Code Y 1580272

Factory_Default_Config.cfg Config File Y 3851

-------------------------------------------------------------------

Total free space: 5111808

Console#copy running-config startup-config

Startup configuration file name []: 15092005_config.cfg

-
Write to FLASH Programming.

/
-
\
-
/
-
\
-
/
-
\
-
/
-
\
-
/
-
\
Write to FLASH finish.

Success.


Console#dir

file name file type startup size (byte)

-------------------------------- -------------- ------- -----------

Unit1:

PoE_Diag_V2.0.0.1.bix Boot-Rom image Y 403828

CXC_132_6712_V2.0.1.2.bix Operation Code Y 1580272

15092005_config.cfg Config File Y 3996

Factory_Default_Config.cfg Config File N 3851

-------------------------------------------------------------------

Total free space: 4980736

Console#exit

% CLI exit session
[/tt]