Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERS5650 Route Policy Help

Status
Not open for further replies.
pronei

pronei

Vendor
Mar 11, 2008
1,010
US
I have an ERS5650 stack with 30 VLANs connected to a single firewall.

I have to add another firewall and send all 0.0.0.0 traffic for VLAN 187 only out the new firewall.

Current static routing for all 30 of my VLANs
0.0.0.0 0.0.0.0 Next Hop 192.168.136.1 (Current Firewall IP)

I need to take VLAN 187 only and make it route like:
0.0.0.0 0.0.0.0 Next Hop 192.168.187.254 (New Firewall for VLAN 187 Only)

How do I do that with IP Route Policy?

VLAN 187 = 192.168.187.1 (VLAN IP Interface)
All members of VLAN 187 have a 192.168.187.x IP, Mask 255.255.255.0 & Default GW of 192.168.187.1

 
Status
Not open for further replies.

Similar threads

Tre0307
  • Locked
  • Question
Need help with Upgrade recommendations
Replies
1
Views
263
Westi
Westi
Iniesta
  • Locked
  • Question
Connect 61C with Cisco router with Tie
Replies
0
Views
79
Iniesta
Iniesta
michaelNWR
  • Locked
  • Question
Lucent Stinger FS+ password reset help
Replies
1
Views
74
Brat2
Brat2
dclake
  • Locked
  • Question
Configure PPPOE on AVAYA Secure Router
Replies
0
Views
70
dclake
dclake
angelo16
  • Locked
  • Question
Route Selection
Replies
2
Views
48
jimbopalmer
jimbopalmer

Part and Inventory Search

Sponsor

Back
Top