errpt shows disk error bug only on boot.

[daneicher]

I installed a Fantom external disk to my H50, running AIX 5.1.

I get an error on boot (enclosed errpt), but after that, I don't seem to get any errors and it read/writes fine....

Should I be concerned? Is there anything I should do to fix the error? Note: Before installing the drive, I did the media certify routine in diagnostics.

Thanks,
Dan

LABEL: DISK_ERR4
IDENTIFIER: 1581762B

Date/Time: Tue Apr 13 07:22:43 EDT
Sequence Number: 1041
Machine Id: 000100644C00
Node Id: winkey
Class: H
Type: TEMP
Resource Name: hdisk7
Resource Class: disk
Resource Type: osdisk
Location: 10-68-00-12,0
VPD: Manufacturer................IBM
Machine Type and Model......IC35L073UCDY10-0
Part Number.................Corp. 2002.
ROS Level and ID............53323343
Serial Number...............E6V2ZH5B
EC Level....................All rights
FRU Number.................. reserved.
Device Specific.(Z0)........000003029F00013A
Device Specific.(Z1)........
Device Specific.(Z2)........) Co
Device Specific.(Z3)........pyrig
Device Specific.(Z4)........t IB
Device Specific.(Z5)........M
Device Specific.(Z6)........

Description
DISK OPERATION ERROR

Probable Causes
MEDIA
DASD DEVICE

User Causes
MEDIA DEFECTIVE

Recommended Actions
FOR REMOVABLE MEDIA, CHANGE MEDIA AND RETRY
PERFORM PROBLEM DETERMINATION PROCEDURES

Failure Causes
MEDIA
DISK DRIVE

Recommended Actions
FOR REMOVABLE MEDIA, CHANGE MEDIA AND RETRY
PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0A0C 0000 2800 0265 60F0 0000 4000 0000 0200 0200 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 08B9 000C 8FC0
---------------------------------------------------------------------------

 

[ogniemi]

Your disk is going down.

# grep ERR4 /usr/include/sys/errids_ssadisk.h
#define ERRID_SSA_DISK_ERR4 0xf7863cfe /* Physical Volume Hardware Error */


Look here on page 274 for "SSA Disk Drive Error Recovery Table"

http://www-900.ibm.com/cn/support/l...ed SerialRAID Adapter Technical Reference.pdf

 

[screwloose]

One error isn't entirely indicative of catastrophic failure but I would watch to see if multiple errors occur, at which point it should be replaced.

 

[MoshiachNow]

Since it shows error while booting only - I would have thought that the bad sector is related to the boot area.

"Long live king Moshiach !"

http://www.7for70.com/