Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Errors

Status
Not open for further replies.

berpen

IS-IT--Management
Jan 14, 2004
26
US
Can anyone please tell me what these errors are and how do I remove them??? Thank you


Port Mtce Name Alt Name Err Type Aux Data First Occur Last Occur Err Cnt Err Rt Rt Hr State Ac
01C0904 DIG-LINE 769 40988 03/26-13:40 05/07-15:22 255 0 5 a y
04A0321 DIG-LINE 769 40988 05/07-12:59 05/07-15:16 37 16 7 a y

 
It is a power feed error. Depending on what vintage and type your digital boards are you will probably have to unplug the phone for about 30seconds to clear the error. If it keeps erroring out than you may need to replace the circuit pack(or check for a short in the wiring, a busted jack, a bad set, or a incorrect set type).


TMG


 
Errors are not necessarily something broken on the system. U will always have errors in your pbx and if u are not getting complaints, then they are not to be worried about. If u are having troubles, then even though u don't have any alarms, u can use the errors to try and find out what is causing the problem. If u have any alarms in the system this is the first place to look to correct problems.
Digital lines sometimes have trouble because of routing cable too close to higher power lines, or interference by copiers, fax machines, or synthetic wigs causing static electricity.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top