Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error
- Thread starter qdtb
- Start date
Update your antivirus, temporarily disable your screen saver (choose None) and scan with your anti-virus set to scan All Files. Update and scan bi-monthly. Create your anti-virus' Rescue disk(s) and update them after each Windows anti-virus update.
You can scan on-line to double-check your Windows scanner at
*** Mandatory (get a firewall of any brand) - Get free Zone Alarm personal firewall anti-hacker countermeasure from (not the ZA Pro demo) 'Don't let anything out to the Internet you don't know what it is.' The terrorists hope you don't use a firewall, quaranteed. Or, get free Sygate personal firewall from Go to the Utilities' Security Section. If you don't they pass messages and programs through your computer using Trojan Horse programs without your knowledge when your only on-line for minutes. Ask your ISP if the problem does or does not exist. It does!
Temporarily disable your anti-virus' real-time scanner before installing any software.
You can scan on-line to double-check your Windows scanner at
*** Mandatory (get a firewall of any brand) - Get free Zone Alarm personal firewall anti-hacker countermeasure from (not the ZA Pro demo) 'Don't let anything out to the Internet you don't know what it is.' The terrorists hope you don't use a firewall, quaranteed. Or, get free Sygate personal firewall from Go to the Utilities' Security Section. If you don't they pass messages and programs through your computer using Trojan Horse programs without your knowledge when your only on-line for minutes. Ask your ISP if the problem does or does not exist. It does!
Temporarily disable your anti-virus' real-time scanner before installing any software.
Error Message: ISSET_SE Caused a General Protection Fault in Module... (Q192890)
The information in this article applies to:
Microsoft Windows 98
Microsoft Windows 95
If this article does not describe the error message that you are receiving, view the following Microsoft Knowledge Base article to view more articles that describe error messages:
Q315854 Windows 98 and Windows Me Error Message Resource Center
SYMPTOMS
When you attempt to install a program from your CD-ROM drive, you may receive the following error message
ISSET_SE caused a general protection fault in module file name at memory address
where file name is the name of the program file you are trying to run, and memory address is the memory address at which the error occurs.
CAUSE
This behavior can occur if any of the following conditions exist:
Norton AntiVirus version 4.04 is installed and Norton AutoProtect is enabled.
You use LiveUpdate for Norton AntiVirus to download an updated version of Norton AntiVirus.
Microsoft IntelliPoint software is installed on your computer, and the Point32 program is currently running.
Microsoft IntelliMouse or Microsoft IntelliMouse Trackball software is installed on your computer, and the Mswheel program is currently running.
RESOLUTION
To work around this behavior, use the appropriate method, and then attempt to install the program again.
Norton AutoProtect Is Enabled
Disable Norton AutoProtect Mode. To do so, on the taskbar right-click the Norton icon, and then click Disable .
You Use LiveUpdate to Download Norton AntiVirus
Obtain the latest version of LiveUpdate for Norton AntiVirus from Symantec's Web site. For more information about how to obtain LiveUpdate, contact
Symantec Technical Support.
The Point32 Program Is Running
Quit the Point32 program by pressing CTRL+ALT+DELETE to open the Close Program dialog box, click Point32 , click End Task , and then click End
Task again.
The Mswheel Program Is Running
Quit the Mswheel program by pressing CTRL+ALT+DELETE to open the Close Program dialog box, click Mswheel , click End Task , and then click End
Task again.
MORE INFORMATION
Disabling the Load AutoProtect At Startup option on the AutoProtect tab does not disable AutoProtect.
Norton AntiVirus is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
The information in this article applies to:
Microsoft Windows 98
Microsoft Windows 95
If this article does not describe the error message that you are receiving, view the following Microsoft Knowledge Base article to view more articles that describe error messages:
Q315854 Windows 98 and Windows Me Error Message Resource Center
SYMPTOMS
When you attempt to install a program from your CD-ROM drive, you may receive the following error message
ISSET_SE caused a general protection fault in module file name at memory address
where file name is the name of the program file you are trying to run, and memory address is the memory address at which the error occurs.
CAUSE
This behavior can occur if any of the following conditions exist:
Norton AntiVirus version 4.04 is installed and Norton AutoProtect is enabled.
You use LiveUpdate for Norton AntiVirus to download an updated version of Norton AntiVirus.
Microsoft IntelliPoint software is installed on your computer, and the Point32 program is currently running.
Microsoft IntelliMouse or Microsoft IntelliMouse Trackball software is installed on your computer, and the Mswheel program is currently running.
RESOLUTION
To work around this behavior, use the appropriate method, and then attempt to install the program again.
Norton AutoProtect Is Enabled
Disable Norton AutoProtect Mode. To do so, on the taskbar right-click the Norton icon, and then click Disable .
You Use LiveUpdate to Download Norton AntiVirus
Obtain the latest version of LiveUpdate for Norton AntiVirus from Symantec's Web site. For more information about how to obtain LiveUpdate, contact
Symantec Technical Support.
The Point32 Program Is Running
Quit the Point32 program by pressing CTRL+ALT+DELETE to open the Close Program dialog box, click Point32 , click End Task , and then click End
Task again.
The Mswheel Program Is Running
Quit the Mswheel program by pressing CTRL+ALT+DELETE to open the Close Program dialog box, click Mswheel , click End Task , and then click End
Task again.
MORE INFORMATION
Disabling the Load AutoProtect At Startup option on the AutoProtect tab does not disable AutoProtect.
Norton AntiVirus is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
- Status
Similar threads
- Locked
- Question
- Locked
- Question