Error when useing netconfig on Catalyst 4000's

[UMBEng]

Im trying to use netconfig to push new passwords to Cisco 4000's. When testing it I receive an error of:

Could not establish a telnet session to device 1.1.1.1: PGM_NM=Configuration Archive:6759:Type=unassigned message type::Failed to send password to remote hostid not get device prompt

Attributes show OK on read/write, telnet, enable secret, with the rest showing up as nothing to test.

Im running Netconfig 3.3 with the following patch,
Resource Manager Essentials 3.3 Incremental Device Update 2.0.

Thanks...

 

[UMBEng]

So it looks like nobody has seen this error before?
In that case can anybody tell me if they have had any luck pushing configuration changes to Cat4000's?

 

[LivingXL]

The reason this caught my eye is because I'm having a similiar problem but with CAT5000's. It's not a telnet problem but a device inventory problem that I'm having.
Have you tried deleting the device and then re-discover it?
That's what CISCO got me to do (it didn't help me but it may help you)
Mike