error when dea-dssm:a1,1;

[mohammedhassan]

hii all
my system is hipath 4000 V5
when try to deactivate hd be AMO ( dea-dssm:a1,1; )
I saw messages ( bold font )
what is it mean ;

DEA-DSSM:A1,1;
H500: AMO DSSM STARTED
H14: THE ACTIVE LOAD AREA <:A1H1E:> IS DEACTIVATED
H16: PARTITION FOR UNIXWARE FILESYSTEM
SYSTEM ID H'12 EXISTS ON HARD DISK
H16: PARTITION FOR UNIXWARE FILESYSTEM
SYSTEM ID H'63 EXISTS ON HARD DISK
H16: PARTITION FOR UNIXWARE FILESYSTEM
SYSTEM ID H'63 EXISTS ON HARD DISK

AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE COMPLETED;


and when try to copy area I ( CF ) to area I ( HD )

<COPY-DDRSM:UNIT=A1,MASTERID=6,MASTERAR=I,SLAVEID=1,SLAVEAR=I,REPLY=N;
S3: LOAD ERROR FOR DATA SUBSYSTEM OF AMO DDRSM
EXCEPTION CODE : H'8442

( to re-install UW7 ) I saw message ( bold font )

 

[Moriendi]

It can't load the DDRSM AMO because you deactivated the HD that contains it. To use DDRSM the destination must be deactivated, not the source.
By turning off the HD you stopped it loading AMOs.

From memory, you couldn't DDRSM area I, the granularity or area size was different across the MO/HD, and DDRSM needs identical areas. You had to sta-copy the files across from one device to the other.

 

[eniyamath]

Hi Hasan

version 5 area i copying is different

e,f,g,h is ok but for I area ,the area in HD and FC must be same.

By default area i will not be same as HDD.

This is for copying HDD to CF

DEA-DSSM:A1,6;
DEL-DASM:A1,6;
DEL-DCSM:A1,6;
ADD-DTSM:A1,HD,31263,512,"CF2G0";
ADD-DCSM:A1,6,HD,"CF2g0";
ADD-DASM:A1,6,3200&992&2400&1120&11217&3200&9868,4096&4096&4096&4096&4096&4096&4096;
ADD-DLSM:A1,6,E,"DS:";
ADD-DLSM:A1,6,F,"BDA:"&"BD:"&":TMD:"&"AS:"&":AMD:"&"MP:";
ADD-DLSM:A1,6,G,":CGD:";
ADD-DLSM:A1,6,H,"MS:"&"SY:";
ADD-DLSM:A1,6,I,":SCR:";
ACT-DSSM:A1,6,,I;
CHA-DSSM:A1,6;
DEA-DSSM:A1,6;
STA-INIT:A1,A1H61;
ANS = y
COPY-DDRSM:A1,1,E,6,E;
ACT-DSSM:A1,6,,I;
ACT-DSSM:A1,1,,I;
STA-COPY:":A1H1I:/",":A1H6I:/",A1;

<:A1H1I:#FREESPACE> -> <:A1H6I:#FREESPACE> ?
ANS = n

<:A1H1I:#FREEFNODE> -> <:A1H6I:#FREEFNODE> ?
ANS = n

<:A1H1I:UW7/APPL/ACDAPP.GZ> -> <:A1H6I:UW7/APPL/ACDAPP.GZ> ?
ANS = c