Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERROR: svc:/system/filesystem/root:default failed to mount /usr

Status
Not open for further replies.

ranganayaki

IS-IT--Management
Nov 22, 2006
14
US
I have installed solaris 10 on 440 on disk 0. on disk 1 I was restoring from backups. then I made changes to vfstab and booted from disk 1
the following is the error I am getting
Rebooting with command: boot disk1
Boot device: /pci@1f,700000/scsi@2/disk@1,0 File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: esora40
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x' for details)
[ system/filesystem/root:default failed fatally (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run

Root password for system maintenance (control-d to bypass):
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode

Nov 22 14:13:35 su: 'su root' succeeded for root on /dev/console
su: No shell /bin/ksh. Trying fallback shell /sbin/sh.
-sh: /bin/i386: not found
-sh: /usr/sbin/quota: not found
-sh: /bin/cat: not found
-sh: /bin/mail: not found
# svcs -x
svcs: not found
 
We aren't using Solaris 10 at the moment at the site were I work, but from your description:
on disk 1 I was restoring from backups. then I made changes to vfstab and booted from disk 1

and the error message:
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x' for details)

It looks like the /usr partition hasn't mounted, thus the inability to access any /usr/... or /bin/... files.

I would recommend double-checking your /etc/vfstab and rebooting.

I hope that helps.

Mike
 
Solaris 10 boots up to single user mode even if all the file system are not mounted, but the network services will not be started.
Check the vfstab.
Also try /sbin/mountall and see if this gives you any information.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top