I'm trying to connect a workstation using VLM and TCP/IP protocol to a NW4.2 server, but I get the error message "Server not found", I checked net.cfg file but everything looks good to me !?. Does anybody can provide me with a copy of net.cfg configurations or give me some clues to solve this problem. <br><br>Thanks..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error: "Server not found" 1
- Thread starter yestrada
- Start date
-
1
- #2
rasindia
IS-IT--Management
- Apr 6, 2000
- 71
First of all you try to ping from your workstation to make it sure the connectivity is there[IP configuration should be proper].If the connectivity is assured you have to check the commands in net.cfg[like prefered server etc.<br><br>No hope?!<br>Check the interrupt configuration of the NIC,reload the vlms with new NIC Novell driver.Check config.sys for lastdrive=z.<br> <p>Rasindia<br><a href=mailto:rasindia@123india.com>rasindia@123india.com</a><br><a href= IndiaMalluEngineers</a><br>
- Thread starter
- #3
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question