Error SCH0011

[shailendra06]

Hi All,

While doing the config changes in one of the extn ifound the given error.
I don't understand what this error states and what is to be done.
Thanks in advance

Regards
Shailendra06

 

[johnpoole]

that is not a good error, tn to dn transloation fails, 99 percent of the time that is a sign of corruption. usually caused by doing a change without a disu on the tn.. if the station is idle, we get by with it 100's of time, but if someone puts that station on hold or worse parks a call from that station.. then you do a change, you end up with that file both outed and still active, ie pointers are listed against a tn that has been changed.. you lose either the tn, dn or both. you'll need to get into the pdt mode or have someone else get into that mode to fix it. the only other way i know to clear that is to do a hard restart before an edd.. that's has about 50 percent chance of getting that file back to prechange config and clearing the problem.. it clears both the change and the connection table.. you changed udata, but pdata does not match

john poole
bellsouth business
columbia,sc