Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error Report Output

Status
Not open for further replies.
KOG

KOG

MIS
Jan 31, 2002
303
GB
Hi Folks

I ran the following comand alog -o -t boot
and it produced the following output, I am not certain if this is the normal output expected?

r/lib/methods/cfgssadisk -2 -l hdisk10
Number of running methods: 16
----------------
Completed method for: hdisk5, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk10
Number of running methods: 15
----------------
attempting to configure device 'hdisk11'
Time: 51 LEDS: 0x80a
invoking /usr/lib/methods/cfgssadisk -2 -l hdisk11
Number of running methods: 16
----------------
Completed method for: hdisk6, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk11
Number of running methods: 15
----------------
attempting to configure device 'hdisk12'
Time: 51 LEDS: 0x80a
invoking /usr/lib/methods/cfgssadisk -2 -l hdisk12
Number of running methods: 16
----------------
Completed method for: hdisk7, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk12
Number of running methods: 15
----------------
attempting to configure device 'hdisk13'
Time: 51 LEDS: 0x80a
invoking /usr/lib/methods/cfgssadisk -2 -l hdisk13
Number of running methods: 16
----------------
Completed method for: hdisk8, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk13
Number of running methods: 15
----------------
Completed method for: hdisk9, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk13
Number of running methods: 14
----------------
Completed method for: hdisk10, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk13
Number of running methods: 13
----------------
Completed method for: hdisk11, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk13
Number of running methods: 12
----------------
Completed method for: hdisk12, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for hdisk13
Number of running methods: 11
----------------
Completed method for: hdisk13, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for pdisk9
Number of running methods: 10
----------------
Completed method for: pdisk2, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for pdisk9
Number of running methods: 9
----------------
Completed method for: pdisk5, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 51 LEDS: 0x80a for pdisk9
Number of running methods: 8
----------------
Completed method for: pdisk4, Elapsed time = 2
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk9
Number of running methods: 7
----------------
Completed method for: pdisk3, Elapsed time = 2
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk9
Number of running methods: 6
----------------
Completed method for: pdisk6, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk9
Number of running methods: 5
----------------
Completed method for: pdisk1, Elapsed time = 2
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk9
Number of running methods: 4
----------------
Completed method for: pdisk7, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk9
Number of running methods: 3
----------------
Completed method for: pdisk9, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk8
Number of running methods: 2
----------------
Completed method for: pdisk0, Elapsed time = 2
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x80a for pdisk8
Number of running methods: 1
----------------
Completed method for: pdisk8, Elapsed time = 1
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x539
Number of running methods: 0
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/etc/methods/darcfgrule"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/lib/methods/fdarcfgrule"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/lib/methods/deftmssar"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/lib/methods/cfgfan"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** stderr ***********
Command not allowed to be executed on this model

----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/lib/methods/defaio"
Time: 52 LEDS: 0x539
return code = 0
****************** stdout ***********
aio0
****************** no stderr ***********
----------------
attempting to configure device 'aio0'
Time: 52 LEDS: 0x594
invoking /usr/lib/methods/cfgaio -2 -l aio0
Number of running methods: 1
----------------
Completed method for: aio0, Elapsed time = 0
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x539
Number of running methods: 0
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/etc/methods/load_blockset_ext"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/sbin/lsdev -C -c port -s tsd -t tsp -F name"
Time: 52 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 52 LEDS: 0x538
invoking top level program -- "/usr/sbin/lsdev -C -c driver -s sdlc -t scie -F name"
Time: 53 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
Time: 53 LEDS: 0x538
invoking top level program -- "/usr/lib/methods/defiocp"
Time: 53 LEDS: 0x539
return code = 0
****************** no stdout ***********
****************** no stderr ***********
----------------
calling savebase
return code = 0
****************** no stdout ***********
****************** no stderr ***********
Configuration time: 53 seconds
Starting AIX Windows Desktop.....
Saving Base Customize Data to boot disk
Starting the sync daemon
Starting the error daemon
System initialization completed.
Starting Multi-user Initialization
Performing auto-varyon of Volume Groups
Activating all paging spaces
swapon: Paging device /dev/hd6 activated.
swapon: Paging device /dev/paging00 activated.
swapon: Paging device /dev/paging01 activated.
Performing all automatic mounts
Multi-user initialization completed
 
Sort by date Sort by votes
Many thanks for responding asap and what a relief.

Cheers

K
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question
AIX Power5 on 5.3- On varyonvg error "cannot be varied on because no good copies of the descriptor area"
Replies
1
Views
506
JenLM
J
JC01
  • Locked
  • Question
rpm -ivh libgcc-6.3.0-1.aix7.2.ppc.rpm error: Failed dependencies: AIX-rpm >= 7.2.0.0 is needed
Replies
2
Views
351
JC01
JC01
amandeepgautam
  • Locked
  • Question
collect2: fatal error: not a COFF file
Replies
0
Views
250
amandeepgautam
amandeepgautam
amandeepgautam
  • Locked
  • Question
error: 'mutex' in namespace 'std' does not name a type
Replies
1
Views
303
amandeepgautam
amandeepgautam
eagleca123
  • Locked
  • Question
AIX 6.1 make LPP source error: bos.terminfo.all.data package missing
Replies
0
Views
147
eagleca123
eagleca123

Part and Inventory Search

Sponsor

Back
Top