Trying to add an OSPF entry for a staic route onb an 8610 (ver 3.0.3) using device manager
Ip Routing>Policy
Using an existing Address ID (2) which has been used for 5 other statics.
Under Address list create new (13) pointing to idlist 2.
Create New Net Address (21) IP 10.64.x.0 255.255.255.0
Create New Net List (21), policy id is blank up to now. so
as done previously go to OSPF announces. Here's where the problem lies:
We insert auto uses 2021 (we have 19 others) give it a name. Select id 21 for Exact list id, Range id, advertise id, Select static (no others), action announce, metric type 2. Hit insert and get the following message:
rclpPolicyOspfAnnounceRowStatus2021: Nvram Limit Has Been Exceeded For Some Static Entry
Any ideas???
2 decades from retirement, 2 minutes from a breakdown
Ip Routing>Policy
Using an existing Address ID (2) which has been used for 5 other statics.
Under Address list create new (13) pointing to idlist 2.
Create New Net Address (21) IP 10.64.x.0 255.255.255.0
Create New Net List (21), policy id is blank up to now. so
as done previously go to OSPF announces. Here's where the problem lies:
We insert auto uses 2021 (we have 19 others) give it a name. Select id 21 for Exact list id, Range id, advertise id, Select static (no others), action announce, metric type 2. Hit insert and get the following message:
rclpPolicyOspfAnnounceRowStatus2021: Nvram Limit Has Been Exceeded For Some Static Entry
Any ideas???
2 decades from retirement, 2 minutes from a breakdown