Error "Function not allowed on private CO line"

[NateRD25]

I am trying to program a DID on a already existed phone and I get the error "Function not allowed on private CO line." when trying to program. First, what does that error mean and can this be changed so I can use the 8855 did?

Thanks

 

[KCFLHRC]

At one time 8855 must have been assigned as a Private line on a phone. Best thing to do is do an ltm in ld 21 and see if you can find the trunk. It should be obvious because it is probably a trunk all by itself.

 

[KCFLHRC]

Do a DNB on 8855 and you may find it that way

 

[NateRD25]

When I do a dnb in ld 11 gives me not in use.

 

[NateRD25]

What should I print out when Im in ld 21.

 

[KCFLHRC]

Ld 21
reg ltm
return
return'
return

 

[KCFLHRC]

Ld 21
Req LTM

 

[NateRD25]

Yea I printed that out, sorry should have read your post more closely, however 8855 does not appear anywhere in that.

 

[NateRD25]

Found it...What does this mean? I can I change that to a different PRDN?

TN 8 0 1 2
DATE
PAGE
DES

DES
TN 008 0 01 02
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 2 2
PRDN 8855
CMF NO
SIGL LOP
SUPN NO
AST NO
IAPG 0
CLS UNR DIP CND ECD WTA LPR APN THFD SPCD
P10 NTC
TKID
AACR NO
DATE NO DATE

 

[KCFLHRC]

8855 wont show up in LD 21 LTM, you should be looking for a lone trunk in a route all by itself. Then you will need to print a tnb on that trunk and see what the PRDN is

 

[NateRD25]

I should be able to change that, right? I have no idea where that would go.

 

[KCFLHRC]

My guess is that it's old programming. You will however need to find what phone it appears on. I don't think it will let you out the trunk until you remove it off of the phone. This is a copper trunk that has a Private appearance on one or more phones.

 

[NateRD25]

Thanks, for the help! SOLVED