here is the output from my terminal server and the router's sh ver and sh run commands
can somebody tell me why i am getting such error...when i log on/access the router...
c2511-ts#sh sess
Conn Host Address Byte Idle Conn Name
1 c2513-1 192.168.10.10 0 28 c2513-1
2 c4500-1 192.168.10.10 0 6 c4500-1
3 c2924-1 192.168.10.10 0 5 c2924-1
* 4 c2514-1 192.168.10.10 0 0 c2514-1
5 c1604-1 192.168.10.10 0 1 c1604-1
c2511-ts#1
[Resuming connection 1 to c2513-1 ... ]
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
c2513-1#
this is the show verion output
c2513-1# sh ver
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
Image text-base: 0x0307EEE0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
c2513-1 uptime is 5 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c2500-jk8os-l.122-1d.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 01761574, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
c2513-1#
Current configuration : 1224 bytes
!
version 12.2
service config
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname c2513-1
!
no logging on
enable password cisco
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
no ip dhcp-client network-discovery
frame-relay switching
!
!
--More--
!
!
interface Loopback0
ip address 33.33.33.33 255.255.255.0
!
interface Ethernet0
ip address 160.160.0.2 255.255.0.0
no ip mroute-cache
no mop enabled
!
interface Serial0
bandwidth 64
ip address 193.193.193.2 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
clockrate 64000
frame-relay interface-dlci 110
frame-relay lmi-type cisco
!
interface Serial1
ip address 190.190.0.2 255.255.0.0
no ip mroute-cache
clockrate 64000
--More--
interface TokenRing0
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
router rip
network 33.0.0.0
network 160.160.0.0
network 190.190.0.0
network 193.193.193.0
!
ip kerberos source-interface any
ip classless
no ip http server
!
!
!
line con 0
exec-timeout 0 0
password cisco
login
transport input none
--More--
line con 0
exec-timeout 0 0
password cisco
login
transport input none
line aux 0
line vty 0 4
exec-timeout 0 0
password cisco
login
transport input telnet
transport output telnet
!
end
c2513-1#
*Ravi
success is not an end point..but the journey..so make every moment of the life happy and successful...by doing what you like to do..
can somebody tell me why i am getting such error...when i log on/access the router...
c2511-ts#sh sess
Conn Host Address Byte Idle Conn Name
1 c2513-1 192.168.10.10 0 28 c2513-1
2 c4500-1 192.168.10.10 0 6 c4500-1
3 c2924-1 192.168.10.10 0 5 c2924-1
* 4 c2514-1 192.168.10.10 0 0 c2514-1
5 c1604-1 192.168.10.10 0 1 c1604-1
c2511-ts#1
[Resuming connection 1 to c2513-1 ... ]
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1-confg (Timed out)
%Error opening tftp://255.255.255.255/c2513-1.cfg (Timed out)
c2513-1#
this is the show verion output
c2513-1# sh ver
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
Image text-base: 0x0307EEE0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
c2513-1 uptime is 5 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c2500-jk8os-l.122-1d.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 01761574, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
c2513-1#
Current configuration : 1224 bytes
!
version 12.2
service config
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname c2513-1
!
no logging on
enable password cisco
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
no ip dhcp-client network-discovery
frame-relay switching
!
!
--More--
!
!
interface Loopback0
ip address 33.33.33.33 255.255.255.0
!
interface Ethernet0
ip address 160.160.0.2 255.255.0.0
no ip mroute-cache
no mop enabled
!
interface Serial0
bandwidth 64
ip address 193.193.193.2 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
clockrate 64000
frame-relay interface-dlci 110
frame-relay lmi-type cisco
!
interface Serial1
ip address 190.190.0.2 255.255.0.0
no ip mroute-cache
clockrate 64000
--More--
interface TokenRing0
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
router rip
network 33.0.0.0
network 160.160.0.0
network 190.190.0.0
network 193.193.193.0
!
ip kerberos source-interface any
ip classless
no ip http server
!
!
!
line con 0
exec-timeout 0 0
password cisco
login
transport input none
--More--
line con 0
exec-timeout 0 0
password cisco
login
transport input none
line aux 0
line vty 0 4
exec-timeout 0 0
password cisco
login
transport input telnet
transport output telnet
!
end
c2513-1#
*Ravi
success is not an end point..but the journey..so make every moment of the life happy and successful...by doing what you like to do..