Error on NLM Startup Unable to Load Language resource

[dethingt]

I am running GW6SP3 on a Novell 6 cluster with NSS volumes. Frequently, when a server fails and the volume fails over to another server, the NLMs do not load properly and I get the following error on the server console "Unable to load language resource: volume/system/gwpoa??.fil (8200). The Groupwise NLM's will now not load on that server until the server gets rebooted. Novell has suggested running the NSS fix, which was done, and didn't correct the problem. Does anyone have any ideas?

 

[Lou0686]

Hi,

I found the following TID that talks about rebuilding the NSS Pool.

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10081819.htm

Also, it's possible that some modules that GroupWise needs to autoload may already be loaded. You way want to add something to the load script to first unload all GroupWise components.

Lou

 

[dethingt]

we have rebuilt the nss pool, no change. I'll try the unload commands in the load commands and see if that works. thanks

 

[Lou0686]

Hi,

Before you try that, if you have some downtime, try unloading things manually and then try running the script each time. It's possible that it's only one module that you will need to add the unload line in the load script.

Normally when an app will not load with a command but will load with a reboot, something is loaded that shouldn't be. This sometimes causes the Public Symbol errors.

Lou