Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error Msg appeared during the booting

Status
Not open for further replies.

laifeng

MIS
Feb 24, 2004
8
TW
Hello All ,
Some error message is appeared on my booting screen .I can not boot normally anymore ! The following is the error message I encountered , Pls help me to resolve it !
Best Regards

*****************SYSTEM ALERT****************
SYSTEM NAME: uninitialized
DATE: 10/07/2004 TIME:09:39:25
ALERT LEVEL: 12 = Software failure
REASON FOR ALERT
SOURCE : 1 =processor
SOURCE DETAIL : 1 = porcessor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail
LDEs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected .
Check Chassis and Console Logs for error messages .

0XA0E000C01100B000 0000000 000005E9 - type 20 = major change in system state
0X58E008C01100B000 00006809 07092719 - type 11 = Timestamp 10/07/2004 09:39:25
A: ack read of this entry - X:Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:
 
This looks like a error that appears before PDC - ie. during memory checks ???

If you press A (perhaps repeatedly) does the system boot.

What is the system, (model), are you running vPars ???

Has anything changed ?

Did it crash, or were you 'just rebooting'.

Have you looked in the console logs as suggested.

Martin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top