Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ERROR message
- Thread starter melhabba
- Start date
- Thread starter
- #2
when I try to display hista or codew not accepted only ddsm
<Dis-ddsm;
DIS-DDSM;
H500: AMO DDSM STARTED
CONTROLLER: 1 IS ACTIVE LOAD DEVICE, LOAD AREA IS:
DS:
TYPE: HD SS-NO : <STDH5> SIZE : 3884 MB ( 62158*64KB) GRAN : 512
AREA: A NAME : A1H1A STATUS : D E F E C T
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H1E STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
DS:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H1F STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H1G STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H1H STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H1I STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 2047 MB (32767*64KB) A-GRAN: 4096
AREA: J NAME : A1H1J STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:GLA:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: K NAME : A1H1K STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
IAG:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 616 MB (9868 *64KB) A-GRAN: 4096
CONTROLLER: 6
TYPE: HD SS-NO : <CF2G0> SIZE : 1953 MB ( 31263*64KB) GRAN : 512
AREA: A NAME : A1H6A STATUS : I N S E R V I C E
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H6E STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H6F STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H6G STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H6H STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H6I STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:MOD-SCR:
ACTIVATED LOGICAL NAMES:
:MOD-SCR:
AREA-SZ: 1183 MB (18940*64KB) A-GRAN: 4096
AMO-DDSM -111 DISK STATUS
DISPLAY COMPLETED;
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
H500: AMO DSSM STARTED
H22: SHUTDOWN OF UNIX WAS INITIATED, PLEASE WAIT
H23: SHUTDOWN OF UNIX COMPLETED
F32: DEVICE <:A1H11:> IS NOT DEACTIVATED BECAUSE THE DEVICE IS BLOCKED BY
DEPENDABILITY; DEACTIVATION IS ONLY POSSIBLE AFTER BLOCK BY DEPENDABILITY
HAS BEEN REMOVED (CHANGE-DSSM)
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE NOT COMPLETED;
<ACTIVATE-DSSM:CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F11: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE THE DEVICE IS BLOCKED BY
DEPENDABILITY; ACTIVATION IS ONLY POSSIBLE AFTER BLOCK BY DEPENDABILITY
HAS BEEN REMOVED (CHANGE-DSSM)
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
H500: AMO DSSM STARTED
H22: SHUTDOWN OF UNIX WAS INITIATED, PLEASE WAIT
H23: SHUTDOWN OF UNIX COMPLETED
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE COMPLETED;
<ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<START-HISTA:RTYPE=SEARCH,STIME="2019-02-3/00:00",CONTEXT=FUNCT,FUNCT=SWUPER;
S3: LOAD ERROR FOR DATA SUBSYSTEM OF AMO HISTA
EXCEPTION CODE : H'8442
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=NO;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=NO;
H500: AMO DSSM STARTED
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE COMPLETED;
<ACT-DSSM:A1,1;
ACT-DSSM:A1,1;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<Dis-ddsm;
DIS-DDSM;
H500: AMO DDSM STARTED
CONTROLLER: 1 IS ACTIVE LOAD DEVICE, LOAD AREA IS:
DS: TYPE: HD SS-NO : <STDH5> SIZE : 3884 MB ( 62158*64KB) GRAN : 512
AREA: A NAME : A1H1A STATUS : D E F E C T
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H1E STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
DS: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H1F STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H1G STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H1H STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
MS:,SY: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H1I STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 2047 MB (32767*64KB) A-GRAN: 4096
AREA: J NAME : A1H1J STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
:GLA:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: K NAME : A1H1K STATUS : D E F E C T
CONFIGURED LOGICAL NAMES:
IAG: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 616 MB (9868 *64KB) A-GRAN: 4096
CONTROLLER: 6
TYPE: HD SS-NO : <CF2G0> SIZE : 1953 MB ( 31263*64KB) GRAN : 512
AREA: A NAME : A1H6A STATUS : I N S E R V I C E
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H6E STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H6F STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H6G STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H6H STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY: NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H6I STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:MOD-SCR:
ACTIVATED LOGICAL NAMES:
:MOD-SCR:
AREA-SZ: 1183 MB (18940*64KB) A-GRAN: 4096
AMO-DDSM -111 DISK STATUS
DISPLAY COMPLETED;
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
H500: AMO DSSM STARTED
H22: SHUTDOWN OF UNIX WAS INITIATED, PLEASE WAIT
H23: SHUTDOWN OF UNIX COMPLETED
F32: DEVICE <:A1H11:> IS NOT DEACTIVATED BECAUSE THE DEVICE IS BLOCKED BY
DEPENDABILITY; DEACTIVATION IS ONLY POSSIBLE AFTER BLOCK BY DEPENDABILITY
HAS BEEN REMOVED (CHANGE-DSSM)
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE NOT COMPLETED;
<ACTIVATE-DSSM:CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F11: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE THE DEVICE IS BLOCKED BY
DEPENDABILITY; ACTIVATION IS ONLY POSSIBLE AFTER BLOCK BY DEPENDABILITY
HAS BEEN REMOVED (CHANGE-DSSM)
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=YES;
H500: AMO DSSM STARTED
H22: SHUTDOWN OF UNIX WAS INITIATED, PLEASE WAIT
H23: SHUTDOWN OF UNIX COMPLETED
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE COMPLETED;
<ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
ACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXBOOT=YES;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
H21: START OF UNIX WAS INITIATED
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<START-HISTA:RTYPE=SEARCH,STIME="2019-02-3/00:00",CONTEXT=FUNCT,FUNCT=SWUPER;
S3: LOAD ERROR FOR DATA SUBSYSTEM OF AMO HISTA
EXCEPTION CODE : H'8442
<DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=NO;
DEACTIVATE-DSSM:UNIT=A1,CNO=1,UNIXSHUT=NO;
H500: AMO DSSM STARTED
AMO-DSSM -111 DISK SWITCHOVER
DEACTIVATE COMPLETED;
<ACT-DSSM:A1,1;
ACT-DSSM:A1,1;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
This exact problem with DEFECT is mentioned in this thread
Make a CHA-DSSM:A1,1;
Then ACT-DSSM:A1,1;
You need the CHAnge to change it from defect state to blocked.
It usually will solve it. Not always.
Make a CHA-DSSM:A1,1;
Then ACT-DSSM:A1,1;
You need the CHAnge to change it from defect state to blocked.
It usually will solve it. Not always.
- Thread starter
- #4
Hi all
<CHA-DSSM:A1,1;
CHA-DSSM:A1,1;
H500: AMO DSSM STARTED
F08: DEVICE <:A1H11:> IS NOT BLOCKED BY DEPENDABILITY
AMO-DSSM -111 DISK SWITCHOVER
CHANGE NOT COMPLETED;
<
<ACT-DSSM:A1,1;
ACT-DSSM:A1,1;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<
<DISPLAY-DDSM:UNIT=A1,TYPE=SCSI;
DISPLAY-DDSM:UNIT=A1,TYPE=SCSI;
H500: AMO DDSM STARTED
H04: NO DEVICE ON CONTROLLER <1> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <2> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <3> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <4> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <5> AVAILABLE OR PRESENT
CONTROLLER: <6>
VENDOR: ATA HD PRODUCT: TRS Tele-Radio-S REVISION: 30/0
DEVICE TYPE: DIRECT-ACCESS DEVICE
SIZE : 2003 MB ( 32051*64KB, 4102560 SECTORS) GRAN : 512
WRITE PROTECTED : N
H04: NO DEVICE ON CONTROLLER <7> AVAILABLE OR PRESENT
CONTROLLER: <8>
OWN SCSI PROCESSOR
AMO-DDSM -111 DISK STATUS
DISPLAY COMPLETED;
<CHA-DSSM:A1,1;
CHA-DSSM:A1,1;
H500: AMO DSSM STARTED
F08: DEVICE <:A1H11:> IS NOT BLOCKED BY DEPENDABILITY
AMO-DSSM -111 DISK SWITCHOVER
CHANGE NOT COMPLETED;
<
<ACT-DSSM:A1,1;
ACT-DSSM:A1,1;
H500: AMO DSSM STARTED
F22: DEVICE <:A1H11:> IS NOT ACTIVATED BECAUSE OF DSCR ERROR H'2B
AMO-DSSM -111 DISK SWITCHOVER
ACTIVATE NOT COMPLETED;
<
<DISPLAY-DDSM:UNIT=A1,TYPE=SCSI;
DISPLAY-DDSM:UNIT=A1,TYPE=SCSI;
H500: AMO DDSM STARTED
H04: NO DEVICE ON CONTROLLER <1> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <2> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <3> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <4> AVAILABLE OR PRESENT
H04: NO DEVICE ON CONTROLLER <5> AVAILABLE OR PRESENT
CONTROLLER: <6>
VENDOR: ATA HD PRODUCT: TRS Tele-Radio-S REVISION: 30/0
DEVICE TYPE: DIRECT-ACCESS DEVICE
SIZE : 2003 MB ( 32051*64KB, 4102560 SECTORS) GRAN : 512
WRITE PROTECTED : N
H04: NO DEVICE ON CONTROLLER <7> AVAILABLE OR PRESENT
CONTROLLER: <8>
OWN SCSI PROCESSOR
AMO-DDSM -111 DISK STATUS
DISPLAY COMPLETED;
Device 1 says it's active load device, defect, and not there??
If the hard disc has died, you're going to need a new one.
You could try removing the disk plate and reinserting, it might need a power cycle. You might need to reload the ADP from CF and save the DB to the CF. Is your CF backup recent ? You need to be careful here.
If the hard disc has died, you're going to need a new one.
You could try removing the disk plate and reinserting, it might need a power cycle. You might need to reload the ADP from CF and save the DB to the CF. Is your CF backup recent ? You need to be careful here.
- Status