Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error message...check SCSI cable

Status
Not open for further replies.

dvannoy

MIS
May 4, 2001
2,765
US
I am running backup exec v8 for netware...sometimes the job will stay active with the following message...check SCSI cable of try a different tape.

I have a compaq proliant server..
I am using NWASPI and CPQSCSI.HAM

i have tryed new cables and new tapes...This does not happen alot but it still happens..

Any help would be appreciated.

Thanks
 
I am running backup exec v8 for netware...sometimes the job will stay active with the following message...check SCSI cable of try a different tape.

I have a compaq proliant server..
I am using NWASPI and CPQSCSI.HAM

i have tryed new cables and new tapes...This does not happen alot but it still happens..

Any help would be appreciated.

Thanks DVannoy
A+,Network+,CNA
dvannoy@onyxes.com
 
Is this a SCSI Timeout Message?
I have had a SCSI Timeout occur on several of my Dell Poweredge Servers running BE 8.5 and Quantum DLT Drives.... and I was able to cure things by reducing the Adaptec SCSI BIOS Speed down to the lowest setting possible...
 
Try using a cleaning tape in your drive, too. I get this error whenever I forget to clean my drive.
James P. Cottingham

I am the Unknown lead by the Unknowing.
I have done so much with so little
for so long that I am now qualified
to do anything with nothing.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top