error making divisions when install UNIX

[Guest_imported]

someone help me to figure out about this error


i´m installing a 36Gb SCSI Hd and i used the custom option in unixSCO for create the diferents filesystems, when the process is finish the next error message apears:

Exit value 139 status value -29952
Fatal error in disk info.c line 3525
Function DIAd Just Division: Cannot adjust division to fit in the usable space: Disk 0

where i can find help about a catalog of errors by number or something

or a suggestion of what is the size recomended for /boot
/root and /swap

 

[apeasecpc]

Would you per chanse be the same person who posted earlier today under the name esdro?

I have an 18G drive divided like this, but that's only about half the size you are trying to set up.

+-------------------+------------+--------+---+-------------+------------+
| Name | Type | New FS | # | First Block | Last Block |
+-------------------+------------+--------+---+-------------+------------+
| boot | EAFS | no | 0 | 0| 15359|
| swap | NON FS | no | 1 | 15360| 801791|
| root | HTFS | no | 2 | 801792| 9349119|
| u | HTFS | no | 3 | 9349120| 17896398|
| | NOT USED | no | 4 | -| -|
| | NOT USED | no | 5 | -| -|
| recover | NON FS | no | 6 | 17896399| 17896408|
| hd0a | WHOLE DISK | no | 7 | 0| 17904410|
+-------------------+------------+--------+---+-------------+------------+
17896410 1K blocks for divisions, 8001 1K blocks reserved for the system


According to the docs, the maximum HTFS size is 1 terabyte, so you shouldn't be running into a size limit with only 36G drives. My guess is that your divisions are somehow exceeding the size available on the drive.

Can you please post what the divvy division table you are trying to set up looks like?

What happens if you don't customize the divisions but let the system choose the sizes?