Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error In daemon.log Check_tapealert

Status
Not open for further replies.

mofou2

Technical User
Mar 5, 2009
2
ES
Hi!! i have a error:

nsrmnd #10: check_tapealert: check_cdi_info and cdi_open failed 16 16 a system error occurred

Please Help me!!!
 
Tapealert is an error initiated by the drive. Could be temporary or permanent.

Look at the device resource - has one device has been disabled ? Probably the daemon.log/daemon.raw file could help as well.
 
Hi!! in daemon.log i have these lines:

03/05/09 19:02:59 nsrd: media info: loading volume 000827 into /dev/nst1
03/05/09 19:03:36 nsrd: /dev/nst1 1:Verify label operation in progress
03/05/09 19:03:36 nsrmmd #10: check_tapealert: check_cdi_infop and cdi_open failed, 16 16 a system error occurred - see errno for more information for device /dev/nst1
03/05/09 19:03:36 nsrd: media warning: /dev/nst1 reading: read open error: drive status is
03/05/09 19:03:37 nsrd: /dev/nst1 1:Eject operation in progress
03/05/09 19:03:37 nsrmmd #10: check_tapealert: check_cdi_infop and cdi_open failed, 16 16 a system error occurred - see errno for more information for device /dev/nst1

Please Help, Thanks
 
Hard to do with 2 lines of error. Where's the beef?
Was this just a temporary hickup or is this a permanent problem?

- If one time only ... don't care

- If permanent, maybe this link will help with some general advice:


You may even switch off CDI for a device for test purposes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top