Error : Event ID1067 in DL380

[1revres]

I have a DL380 with 5300 controller, the ACU shows memory/battery failed. I replaced 64MB accelerator board and batteries together. The error was fixed. No more error in ACU. I ran ADU and all clear.
I also updated the 5300 controller FW to version 3.54, as well as all disk drives FW.

4 days later, the following error keeps popping up twice daily in the event log:

"Error
Source=Storage Agents
Event ID=1067
Compaq Drive array accelerator battery failed. The array accelerator board attached to the array controller in slot 3 reports a battery failure."

There is no error in ACU, or ADU.(array config/array diagnostics utility)
This is the second replacement of the memory/battery board.
Would it be a false alarm, or updating of the HP management agent help?
Any comment would be much appreciated.
I thank you in advance.

 

[HarleyQuinn]

Hmm, not really a COM+ question.

I'd hazard a guess this might be better placed in forum486

HarleyQuinn
---------------------------------
Black coat, white shoes, black hat, cadillac. The boy's a timebomb!

You can hang outside in the sun all day tossing a ball around, or you can sit at your computer and do something that matters. - Eric Cartman

Get the most out of Tek-Tips, read FAQ222-2244: How to get the best answers before post