alfonsovega
IS-IT--Management
por favor como soluciono este error:
foxprow provoco un error de division en el modulo
foxprow.exe en 0001:0000f1c9
foxprow provoco un error de division en el modulo
foxprow.exe en 0001:0000f1c9
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error en Foxpro de windows 2.6a bajo win98 o WinMe 1
- Thread starter alfonsovega
- Start date
- Status
-
1
- #2
alfonsovega,
Unfortunatly, I don't speak good enough spanish to help with this, but here is the answer, if you can find a translator:
You need to patch your FOXPROW.EXE with an update available from the Microsoft website. ( You can probably find it by doing a search for PATCH FOXPROW. It has been a long time since I have needed it.
The error you are experienceing is less likely Win98, or ME, and more likely to be the speed of the processor you are running on. If you have been using Fox2.6 on processors less than 450Mhz, it is not a problem. But as soon as you go over that speed, you will get the Divide by Zero error unless you patch the .EXE. You also need to patch the FOXW2600.ESL file (but the same patch should work for both).
Please, if someone can trasnlate this, help out Alfonsovega.
Thanks,
-Scott
s-) Please let me know if this has helped s-)
Unfortunatly, I don't speak good enough spanish to help with this, but here is the answer, if you can find a translator:
You need to patch your FOXPROW.EXE with an update available from the Microsoft website. ( You can probably find it by doing a search for PATCH FOXPROW. It has been a long time since I have needed it.
The error you are experienceing is less likely Win98, or ME, and more likely to be the speed of the processor you are running on. If you have been using Fox2.6 on processors less than 450Mhz, it is not a problem. But as soon as you go over that speed, you will get the Divide by Zero error unless you patch the .EXE. You also need to patch the FOXW2600.ESL file (but the same patch should work for both).
Please, if someone can trasnlate this, help out Alfonsovega.
Thanks,
-Scott
s-) Please let me know if this has helped s-)
- Status
