Error Code SCH#8825 3

[techmk]

HI

I'm trying to change the keys on a 3820m phone to SCR ( Ring ) , at the Mo they are SCN

I thought of doing a chg then edit but it wont allow me , then i tried to ''out'' the phone and re-create it with the new scr keys , i get the error code above

Any idea's ?

Many thanks

 

[geirendre]

That DN is a member of a GroupHunt-list.
You must first remove it from the list, then you can
change and delete it.
Print GHT in LD 20, and edit it in LD 18.

 

[bluerigsby]

Unless your software is really old you can view an alpha/numeric description of an error code.

When you see an error code such as #8825
- Move out of the overlay back to an > prompt
Type the following :

>err sch8825 press return

>

SCH8825
The DN must first be removed from the GHT list.

 

[PMcCallum50]

You can also, following an error, briefly exit for a 1 command error description, after which you are returned to the same place you were at prior to the exit by sending the exclamation mark (shift 1) ... see the following

REQ: NEW
TYPE: M3908
SCH0099 M3908?
TYPE: !
>ERR SCH0099
>

SCH0099
This message appears when the invalid input is detected by the
machine.
The actual output may vary, according to the input received.
Action: Refer to the following examples for possible output.
Info

3903
TN
and you continue on....the shift 1 is good for 1 error message at a time....