Can anyone help.... I am getting
Code 12
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
This is for my Nvidia GeForce 7600gt PCI-E Display Adaptor. MS suggestion is...
Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller is not an interrupt from the BIOS because of a corrupted Multiprocessor System (MPS) table).
You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
However, i cannot identify the conflict? This is whats in Sys Info Conflicts
I/O Port 0x0000A000-0x0000FFFF PCI bus
I/O Port 0x0000A000-0x0000FFFF PCI standard PCI-to-PCI bridge
I/O Port 0x00000000-0x000003AF PCI bus
I/O Port 0x00000000-0x000003AF Direct memory access controller
I/O Port 0x000003C0-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003C0-0x000003DF VgaSave
IRQ 22 NVIDIA nForce 590/570/550 Serial ATA Controller
IRQ 22 NVIDIA nForce Networking Controller #2
IRQ 23 NVIDIA nForce 590/570/550 Serial ATA Controller
IRQ 23 High Definition Audio Controller
I/O Port 0x00001C00-0x00001C80 PCI bus
I/O Port 0x00001C00-0x00001C80 NVIDIA nForce PCI System Management
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xA0000-0xBFFFF VgaSave
I/O Port 0x000003B0-0x000003DF PCI bus
I/O Port 0x000003B0-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003B0-0x000003DF VgaSave
There are no other PCI devices plugged in.
Regards
Si
Code 12
This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
This is for my Nvidia GeForce 7600gt PCI-E Display Adaptor. MS suggestion is...
Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller is not an interrupt from the BIOS because of a corrupted Multiprocessor System (MPS) table).
You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
However, i cannot identify the conflict? This is whats in Sys Info Conflicts
I/O Port 0x0000A000-0x0000FFFF PCI bus
I/O Port 0x0000A000-0x0000FFFF PCI standard PCI-to-PCI bridge
I/O Port 0x00000000-0x000003AF PCI bus
I/O Port 0x00000000-0x000003AF Direct memory access controller
I/O Port 0x000003C0-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003C0-0x000003DF VgaSave
IRQ 22 NVIDIA nForce 590/570/550 Serial ATA Controller
IRQ 22 NVIDIA nForce Networking Controller #2
IRQ 23 NVIDIA nForce 590/570/550 Serial ATA Controller
IRQ 23 High Definition Audio Controller
I/O Port 0x00001C00-0x00001C80 PCI bus
I/O Port 0x00001C00-0x00001C80 NVIDIA nForce PCI System Management
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xA0000-0xBFFFF VgaSave
I/O Port 0x000003B0-0x000003DF PCI bus
I/O Port 0x000003B0-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003B0-0x000003DF VgaSave
There are no other PCI devices plugged in.
Regards
Si