Error BUG1010

[EddieDuece]

I keep getting error BUG1010 and think that the problem has been identified and hopefully fixed. What I am wondering is if I don't clear the log in PDT, will I keep getting this error, or will it go away when I do in fact correct the error in the PBX? This is driving me nuts!

BUG1010
BUG1010 : 8 2 8 1 000093B6 00000C41 25BF6A4E 0353550D 00000000 00000000 0000000
0 00000000 12 032B260D 03281B2F 00000000 0 00000000 00000000 00000000 00000000
00000000 00000000 00000000
BUG1010 + 00B29382 01076649 0A6D08FA 0102A99E 00FBF418
BUG1010 + 010682A4 0142DF7C 0142DA3D 0142D997 0142B4B6
BUG1010 + 0142B411 00BADA00 00BAA6DC 00BAA2C6 01B642E6
BUG1010 + 01B5D882 01105D1C

 

[Firebird Scrambler]

It is difficult to say if the problem will go away. You might want to follow the error report below

BUG1010 x y z a b
An Error has been captured in C++ GF code and the error is related to
Call Control. Where:
x is the Error Category;
y is the Error Code specific to the error category;
z is the DCH/DSL number;
a is Interface Type (PRI/BRI); and
b is the Call Reference number.

Capture BUG traces and do DUMP_ERROR_LOG from the pdt.
Severity: Major



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[EddieDuece]

Have you ever done this? I don't mess around with PDT.