I am running Backup Exec for Netware Version 8.5 on a Novell Netware 4.2 network. I came across this error message when I came in to work yesterday. I have the backup set to eject the tape after each backup. I had noticed that the tape was not ejected and there was no printout. The backup from the previous day went through with no problem.
The only way to get rid of the error is to press esc. The message goes away for a minute and the job session screen says that job #1 is ready. Then the Error BEP Failure 0x710 appears again.
I have tried to unload Backup Exec and reload it but the server will not let me unload the program.
I have tried to cancel the job but the server does not give me the option.
Any tips would be very appreciated.
The only way to get rid of the error is to press esc. The message goes away for a minute and the job session screen says that job #1 is ready. Then the Error BEP Failure 0x710 appears again.
I have tried to unload Backup Exec and reload it but the server will not let me unload the program.
I have tried to cancel the job but the server does not give me the option.
Any tips would be very appreciated.