Running Wn95 w/s and Win NT w/s on WinNT server4.0 sp 5, 5mb memory 10/100 nic card
approx 45 users and 7 printers
We had users getting disconnected from 1 network application after I started to run another application network wide. I opened the log event viewer and saw several instances of the following "The server was unable to find a free connection 41 times in the last 60 seconds. event id =2022
warning.
I checked the Knowledge base at microsoft = Q130922
but it points more towards a win 3.11 instance and a netware gateway share -.
The support info wants me to
go to regedt32
then \system\currentcontrolset\services\lanmanserver\paramaters
add value
maxfreeconnection dword data=8
(on my server this is what it is set to)
and then maxworkitems
reg_dword data=512
on my server it is set to hex 1000 or decimal 4096, so it looks like I have enough connections??
Yes ? NO?
Can I bump this number up and hope to not have disconnect problems?
I found 2 items referenced in tek-tips to Error 2022 but they were of no help.
Any thoughts ??
Thank You.
approx 45 users and 7 printers
We had users getting disconnected from 1 network application after I started to run another application network wide. I opened the log event viewer and saw several instances of the following "The server was unable to find a free connection 41 times in the last 60 seconds. event id =2022
warning.
I checked the Knowledge base at microsoft = Q130922
but it points more towards a win 3.11 instance and a netware gateway share -.
The support info wants me to
go to regedt32
then \system\currentcontrolset\services\lanmanserver\paramaters
add value
maxfreeconnection dword data=8
(on my server this is what it is set to)
and then maxworkitems
reg_dword data=512
on my server it is set to hex 1000 or decimal 4096, so it looks like I have enough connections??
Yes ? NO?
Can I bump this number up and hope to not have disconnect problems?
I found 2 items referenced in tek-tips to Error 2022 but they were of no help.
Any thoughts ??
Thank You.