Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error 1309 VM SWAP FILE
- Thread starter 4notrump
- Start date
This is what Blinker docs. says about the error:
1309: no more memory available
------------------------------------------------------------
This message indicates that the temporary swap file created by the virtual memory system has filled the disk on which it was created, or that the virtual memory sytem limit of 64 MB has been reached.
Check that the program is not looping allocating memory, and if not then make more space available on the temporary drive or change the drive to which the virtual memory swaps.
If this does not fix the problem, could the index key be reduced, at least to test it.
I hope this has been of some help.
1309: no more memory available
------------------------------------------------------------
This message indicates that the temporary swap file created by the virtual memory system has filled the disk on which it was created, or that the virtual memory sytem limit of 64 MB has been reached.
Check that the program is not looping allocating memory, and if not then make more space available on the temporary drive or change the drive to which the virtual memory swaps.
If this does not fix the problem, could the index key be reduced, at least to test it.
I hope this has been of some help.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question