I see these errors in my Option81C Rel 25.40B quite regularly, NI2 PRI running to DMS-100, mostly during high call volume periods. It appears that the call is being torn down fast enough for the pbx's liking. In the time it takes to trace the channel twice the call drops and a new one is in its place or the TN is idle? Is there a timer on the route or the DCH I can adjust for this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ERR9032 N NI2 PRI
- Thread starter LanceMI
- Start date
phonejack99
Technical User
If this is a PRI (& IFC = NI2) check out using service messages, this will greatly improve your spans performance.
phonejack99
Technical User
Another idea would be using B-Channel Overload Control
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question