I have the same problem someone had dealed with one year ago... Did you solve it?
ERR3036 :0 12 15 14 <---THIS IS WHAT I GET
ERR3037 :0 12 15 8 <---THIS IS WHAT I GET
What the PBX tells me:
ERR3036 r s j ts
Continuity failure has occurred on assigning timeslots for speech
paths. First attempt failed; tries to get new path.
Parameters are:
r = receive loop
s = send loop
j = junctor used to transmit to the RRR loop ID
ts = timeslot used on transmit loop to send PCM data to the receive loop
My connection is like this:
CEM CEM QRO CCM CCM CCM
Nortel-Cisco GW-Cisco GK-Cisco GW-Nortel-Cisco CallManager
What happens is calls are completed in both ways between Nortels in CEM and CCM and inside CCM between Cisco call manager and Nortel.
But even though from Cisco Call Manager CCM to Nortel CEM it works, the calls get disconnected in the other way (when the originator is in CEM).
Any help. I have a ticket with my Maint. Provider now, but I could get quicker results here.
ERR3036 :0 12 15 14 <---THIS IS WHAT I GET
ERR3037 :0 12 15 8 <---THIS IS WHAT I GET
What the PBX tells me:
ERR3036 r s j ts
Continuity failure has occurred on assigning timeslots for speech
paths. First attempt failed; tries to get new path.
Parameters are:
r = receive loop
s = send loop
j = junctor used to transmit to the RRR loop ID
ts = timeslot used on transmit loop to send PCM data to the receive loop
My connection is like this:
CEM CEM QRO CCM CCM CCM
Nortel-Cisco GW-Cisco GK-Cisco GW-Nortel-Cisco CallManager
What happens is calls are completed in both ways between Nortels in CEM and CCM and inside CCM between Cisco call manager and Nortel.
But even though from Cisco Call Manager CCM to Nortel CEM it works, the calls get disconnected in the other way (when the originator is in CEM).
Any help. I have a ticket with my Maint. Provider now, but I could get quicker results here.