ERR3036 :89 51 0 23<---THIS IS WHAT I GET
ERR3037 :89 51 1 19<---THIS IS WHAT I GET
What the PBX tells me?
ERR3036 r s j ts
Continuity failure has occurred on assigning timeslots for speech
paths. First attempt failed; tries to get new path.
Parameters are:
r = receive loop
s = send loop
j = junctor used to transmit to the RRR loop ID
ts = timeslot used on transmit loop to send PCM data to the receive loop
ERR3036 and ERR3037 messages refer to one-way connections so that if
both one-way connections fail, either message may print out twice.
ERR3036 also occurs if a loop on the QPC414 Network card is not
configured. This is not an error condition. To prevent ERR3036
occurring in this case, define the loop in LD 17.
What happens is calls get disconnected and even worse, check this out.
You call me, we talk, all of a sudden you cannot hear me, but I can hear you, and then I hear you talking to someone else, who tells you their phone rang normally and you were on their line.
Any help. I have a ticket with my Maint. Provider now, but sometimes I get quicker results here.
This is a Twilight Zone issue here.
ERR3037 :89 51 1 19<---THIS IS WHAT I GET
What the PBX tells me?
ERR3036 r s j ts
Continuity failure has occurred on assigning timeslots for speech
paths. First attempt failed; tries to get new path.
Parameters are:
r = receive loop
s = send loop
j = junctor used to transmit to the RRR loop ID
ts = timeslot used on transmit loop to send PCM data to the receive loop
ERR3036 and ERR3037 messages refer to one-way connections so that if
both one-way connections fail, either message may print out twice.
ERR3036 also occurs if a loop on the QPC414 Network card is not
configured. This is not an error condition. To prevent ERR3036
occurring in this case, define the loop in LD 17.
What happens is calls get disconnected and even worse, check this out.
You call me, we talk, all of a sudden you cannot hear me, but I can hear you, and then I hear you talking to someone else, who tells you their phone rang normally and you were on their line.
Any help. I have a ticket with my Maint. Provider now, but sometimes I get quicker results here.
This is a Twilight Zone issue here.