Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERR and BUG messages in PDT Logs 1

Status
Not open for further replies.

Tsaf360644

Technical User
May 26, 2009
35
IN
Hi Folks,

continously I am getting err5098 from 11C, also sometimes BUG 5327. Below are the logs from PDT.

ELAN027 Version mismatch detected in connection to IP 10.188.28.214
Version 3.02 is not supported.


pbxLinkMon: pbxLinkParsePCHFile stat() c:/u/db/node/node.pch file got wrong value, errno = 0x380003.


SRPT170 pbxLinkMon: pbxLinkParseNodeFileByDir no nodeXXXX.cfg file was found.

I know that these messages are of Minor type, but really would like to know is there any permanent fix for this.

Thanks in advance.



 
what are you using elan 27 for?

john poole
bellsouth business
columbia,sc
 
or what is IP 10.188.28.214

Also what type if switch and what rls?
 
Hi,

its 11C with release 4 and elan is used for ITG card LAN.
ITG line side and trunk cards are there.

Regards,
 
sounds like your switch was upgraded but the ITG card was not - time to upgrade ITG card to match switch level.

Version 3.02 - if switch is 4.0 line cards needs to be 4.00.55. you can get for free from Nortel Web site.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top