epson thermal m165a/tm t90p/micros 3700

[krazeeddie]

m165a/ tm t 90p thermal printers
I hooked to a micros uws4 serial but I get nothing, micros does not have selection for this printer any ideas?

 

[Johnabbate]

Micros is very particular about which printers you use. I have never tried using the T90. Only Epson TM-88

Make sure that it is set to serial in the POSCONFIG/DEVICES.
Make sure that the dip switches on the bottom of the printer are set to Serial. (check the manual)
Also make sure that you use a NULL MODEM CABLE not just a regular serial cable.

 

[Jackba]

just select TM-88 and configure it as such it should work