Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Epson Printing Issue...

Status
Not open for further replies.

Chad123

Programmer
Apr 11, 2003
52
CA
Here is an interesting issue... First of all, I will tell you what Printer I am using: Epson 1075x. Also, I am using continuous paper...

Now, when I print a known one page document, it spans out and print the bottom of every page on another page. I have tried rebooting both the machine as well as the printer. I have tried reinstalling the printer drivers, and even changed the printer settings with all margins set to 0.

Now, I print the exact same document on another printer and it prints fine...

Any ideas?
 
Check the default printer configuration to be sure the page length is 66 lines. Some printers default to 60, and some operating systems default the printer page length to 60 lines (Unix does this in the print interface). There is also a hardware configuration on many printers to 'skip over perf'. If this is set, the printer performs an auto slew about 1 inch from the bottom of the form. Check these out and see if this doesn't help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top