Guest_imported
New member
- Jan 1, 1970
- 0
hi,
the envd cmd on HP is used to check temp on Series 800. is there a similar command on AIX
the envd cmd on HP is used to check temp on Series 800. is there a similar command on AIX
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
envd Series 800
- Thread starter Guest_imported
- Start date
- Status
I am starting to think that some large corporation has migrated to AIX from HP. You guys need to have a staff meeting. Send the following link out in a memo to the IT dept.
IBM Certified -- AIX 4.3 Administration
IBM Certified -- AIX 4.3 Support
IBM Certifiable!
IBM Certified -- AIX 4.3 Administration
IBM Certified -- AIX 4.3 Support
IBM Certifiable!
But the rosetta stone doesn't have envd listed on it!
Anyway, niks_m, try /usr/lpp/diagnostics/bin/uesensor -l. Is that what you are looking for? There is another command similar to that for reading the environment for SSA drawers.
But AIX also has errpt, which logs hardware and software errors. I have a script that is kicked off with every system boot that will email me a message when a new error report is detected. (I got the script from someone in the forum.) Check the man page for errpt and see if that is what you need.
Anyway, niks_m, try /usr/lpp/diagnostics/bin/uesensor -l. Is that what you are looking for? There is another command similar to that for reading the environment for SSA drawers.
But AIX also has errpt, which logs hardware and software errors. I have a script that is kicked off with every system boot that will email me a message when a new error report is detected. (I got the script from someone in the forum.) Check the man page for errpt and see if that is what you need.
- Status