Enterprise 3500

[PappaG]

Hi All

can anyone tell me how to manually configure the nic in one of these boxes we are currently connected to a switch port at 10mb half duplex we want to change the switch port to 100mb but i am told we will not use auto-negotiate can i manually config the card for 100mb half duplex and also 100mb full duplex.

Thanks in advance

 

[daFranze]

you can set this using ndd commands -> see faq60-4083

Best Regards, Franz
--
Solaris System Manager from Munich, Germany
I used to work for Sun Microsystems Support (EMEA) for 5 years