ENET QPC414C card RED LED 1

[esean2k]

Can anyone help..? One of my cards on my 81c is displaying a red LED QPC414C E-NET card, how can I check the status of it and dis/enl it.. It lives in CE Netgroup 1 self 0 slot 6.
Any advise would be welecome..

 

[TheWorkingMan]

LD 32 stat 34, stat 35. You may have one of these loops that are not being used. No big deal, you will have a red light.

TWM

 

[johnpoole]

stat 32 0 stat 32 1, the reason that one light may be red is you may not have a loop 32...and since my switch is at work an i'm not, it'a either loops 32 or loop 36.. a card in that slot if used for a t1 would be loop 34 and 35 and you would stat it in 60...a 414 if my memory serves me right, is a network card, that means that it can't be loop 34..loops must be a number divisable by 4 ie 4 8 12 16 32 36 40 etc

john poole
bellsouth business
columbia,sc

 

[TheWorkingMan]

32/33 would be the conference/TDS pack. The next loop 34/35 slot six would be in this case the ENET card. Not a superloop, that is why it can be 34. Superloops are four loops. Hints the 4,8,12,16.... But ENET card can be in any dual-loop.

TWM

 

[johnpoole]

and a qpc 414 is a enet card, not a conf tds

john poole
bellsouth business
columbia,sc

 

[hawks]

Also make sure that the cable is secure to the card. That card accepts 2 cables for 2 loops.

 

[johnpoole]

top connector is the 1 loop bottom is the 0 loop.. you would have noticed a loop down, usually before you noticed the red light

john poole
bellsouth business
columbia,sc

 

[TheWorkingMan]

John,
I know what a QPC414 card is!!! Read the question, the QPC card is in slot 6 in network 1 shelf 0. That is loop 34/35. I would guess that loop 32/33 is a Conf/TDS card. Anyway slot 6 in that network group is and will always be loop 34/35.

Cheers,
TWM

 

[johnpoole]

i don't doubt that you know your cards, sorry if i misstated my response, i tried to point out that 34/35 is not a loop

john poole
bellsouth business
columbia,sc