Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Enabling PRI channels
- Thread starter twin60
- Start date
LD 60
DSCH xx xx (loop and channel)
ENCH xx xx (loop and channel.)
If these channels repeatedly go out of service, it would appear you have other issues that need to be corrected. You could start with having the Telco do none intrusive testing on the circuit to see if there are any errors on it and work up from there.
DSCH xx xx (loop and channel)
ENCH xx xx (loop and channel.)
If these channels repeatedly go out of service, it would appear you have other issues that need to be corrected. You could start with having the Telco do none intrusive testing on the circuit to see if there are any errors on it and work up from there.
- Status
Similar threads
- Locked
- Question
- Locked
- Question