Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Enabling NTP on 3750 Switches ?

Status
Not open for further replies.

Sagar18

IS-IT--Management
Jun 1, 2011
3
SE
I have 3750 and several
2960 Switches in my office.
I want to set up any 1 of
my switches as an NTP
master and other switches
recieve time from it. But
both the above models
dont support NTP MASTER
command. I dont want to
involve server in this
process. So what is the
other alternative. Can I use
a client xp machine to be a
NTP Master. Is there any
softwares which can do
this.
NB: I cant upgrade my IOS
 
There are various freeware NTP servers available for Windows - have a search. You can also configure a Windows Server as an NTP master, however if there is Internet access available (or can be) then I'd configure one of your 3750's to sync to a 'real' NTP server on the Internet. Or even better buy a GPS clock and sync to this?

Andy
 
Do any of your switches support the "ntp peer" command?

What is your edge router model(s)?

You can usually configure your switch as an NTP server by the peer command...

switch-10-1-1-1#conf t
switch(config)#ntp peer 10.1.1.13

and on 10.1.1.13

switch-10-1-1-13#conf t
switch(config)#ntp server 10.1.1.1

post a sh ver from each of both models. Any Cisco device can serve as the NTP server.

Myself, I use a free internet stratum 15 NTP server on my edge router, and have all my nodes (switches, other routers, WAPs, computers, servers, printers) authenticate to my edge router.

TIMMAY!

Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(25c), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1523-2010 by Cisco Systems, Inc.
Compiled Thu 11-Feb-1539 23:02 by ßµ®†Šß€€Š

ROM: System Bootstrap, Version 12.2(7r) [ÝØÝØMØÑ], RELEASE SOFTWARE (fc1)

Edge uptime is 469¼
 
Thank you ADB100 and Burstbees for your reply. I am pretty confused with this small technology lol.
I have 2800 as my edge router. But I'm not supposed to configure it. My organisation set up is so complex and I dont have a direct ping to the internet from my 3750 Core switch.
Now since I'm very new to networking I have lot of doubts. What is the difference between an NTP Master and an NTP Server. If I hardcore my 3750 with a clock set command can my other 2960 who has ping to the management IP s can synchronise time from it. Sorry for my lack of knowledge on the subject.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top