enabling.....bcm50 2

[ewick777]

hi
dip switch ok all off and all on
keycode exp need ok
module g4x16
just g4 enable
dsm16 enabling.............
i try reboot,reste warm, disconnect power
enable disable enable
try exp2 same things
exp1 yet
enable disable,reboot,warm reset,disconect power on exp
disconnect all power
why g4 enable
and dsm 16 enabling.............

 

[endlesswinter]

Have you plugged a phone in yet? I belive it will enable only after it has a dig phone.

 

[RPMcMurphy]

What release, is the card in an expansion module, if so, unplug the pwr from the expansion mod, wait at least 30 seconds and power it up again. I think its a known issue.

 

[ewick777]

Thanks thats ok
Merci!! Beaucoup de votre aide.
S'agissait de seulement brancher un telephone a+

 

[acewarlock]

What fixed it and give them stars




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Deweyhumbolt]

It was endless.

Adversity is Opportunity